GE Logiq 5 / P5 Keyboard Assembly (5175899 Rev 7) Review: Best OEM Replacement for Your Ultrasound?
When your GE Logiq 5 or Logiq P5 ultrasound system starts showing unresponsive keys, sticky controls, or erratic input behavior, every hour of downtime translates directly into missed patient appointments and lost revenue. Sourcing the right keyboard assembly — not a generic substitute — is the fastest path back to full operation. This review covers the OEM GE keyboard assembly part number 5175899 Rev 7 (eBay listing 293220107472), what you need to know before purchasing, and whether the $150 price point from a reputable medical equipment reseller represents genuine value.
Product Overview
The GE Logiq 5 / P5 Keyboard Assembly (P/N 5175899 Rev 7) is the original equipment manufacturer (OEM) control panel keyboard designed specifically for GE Healthcare's Logiq 5 and Logiq P5 cart-based ultrasound platforms. These mid-range systems were workhorses in general imaging, OB/GYN, vascular, and small-parts applications throughout the 2000s and early 2010s, and many facilities continue to rely on them today.
Key Specifications:
- Part Number: 5175899
- Revision: Rev 7
- Compatible Systems: GE Logiq 5, GE Logiq P5
- Type: Full keyboard/control panel assembly
- Condition (listed unit): Used/refurbished — sourced from floridamedicaleq
- Listed Price: ~$150 (eBay)
- Reference Listing: 293220107472
This is a direct-swap replacement, not a third-party clone. Genuine GE assemblies maintain the tactile feedback, key travel, and membrane integrity that technicians expect from OEM hardware.
Hands-On Assessment: What Biomedical Techs Need to Know
We've evaluated this specific listing and similar GE Logiq keyboard assemblies through the lens of hospital biomedical engineering departments and independent ultrasound service companies. Here's what matters in practice.
Compatibility Verification
Before ordering any keyboard assembly, confirm your exact model and current revision:
- Open the GE Logiq system menu and navigate to About / System Info to check the software version and hardware configuration.
- Cross-reference the part number on your existing assembly (typically printed on a label on the underside of the keyboard bezel).
- Rev 7 is compatible with the majority of mid-production Logiq 5 and P5 units. Earlier Rev 4 or Rev 5 units may require a firmware compatibility check before swapping in a Rev 7 board — consult your GE service manual or a certified GE service engineer if uncertain.
Installation Considerations
Swapping a Logiq 5/P5 keyboard assembly is a moderately involved procedure:
- Power down fully and disconnect from mains. Allow capacitors to discharge per the GE service manual protocol.
- The keyboard assembly connects via a multi-pin ribbon cable to the main control board. The connector is firm and directional — inspect for bent pins on the existing harness before installation.
- Torque specifications for panel screws matter here. Over-tightening can crack the plastic bezel on older units.
- Post-installation, perform a full key-function test using the GE diagnostics menu before returning the unit to clinical use.
A trained biomedical technician should complete this swap in 30–60 minutes. It does not typically require GE field service unless the underlying control board is also damaged.
Part Condition and Sourcing Integrity
The listing from floridamedicaleq is a Florida-based medical equipment reseller with an established eBay storefront. Used OEM parts at this price point ($150) are standard for decommissioned GE ultrasound systems — hospitals and imaging centers regularly sell parts-grade or functioning-surplus equipment. For a keyboard assembly in this class, $150 is at the lower end of the market; equivalent parts from GE's parts depot (when available) can run $400–$800 or more.
We recommend:
- Asking the seller for photos of the actual unit before purchase, not stock images
- Confirming the return window (eBay's Buyer Protection covers most scenarios)
- Requesting a brief test video if the seller can power the donor system
Check current eBay availability and pricing for the GE Logiq P5 keyboard assembly 5175899
Pros and Cons
Pros:
- Genuine OEM part — no compatibility compromises
- $150 is significantly below GE depot pricing for new/refurbished stock
- Direct-swap replacement with no firmware modification required in most cases
- Sold by an established medical equipment reseller with eBay Buyer Protection
- Rev 7 is the most widely compatible revision for production Logiq 5/P5 units
Cons:
- Used condition — no warranty beyond the seller's stated return policy
- Rev compatibility must be verified before purchase; not a universal fit for all Logiq 5 revisions
- Stock is inherently limited — once sold, no guarantee of restock from the same source
- Requires biomedical technician-level skill for proper installation
- No included installation documentation — you need the GE service manual
Performance Breakdown
| Aspect | Rating | Notes |
|---|---|---|
| Part Authenticity | ★★★★★ | OEM GE part, not a clone |
| Price/Value | ★★★★☆ | Well below depot pricing for genuine OEM |
| Sourcing Reliability | ★★★★☆ | Reputable seller, eBay protection applies |
| Compatibility | ★★★★☆ | Excellent for mid-production Logiq 5/P5; verify Rev |
| Install Complexity | ★★★☆☆ | Requires trained BMET — not a DIY job |
Who Should Buy This
This part is the right call for:
- Biomedical engineering departments at hospitals or imaging centers with GE Logiq 5 or P5 systems that need to minimize service call costs by handling keyboard failures in-house.
- Independent ultrasound service companies building parts inventory for GE Logiq platform support contracts.
- Refurbishers and resellers restoring Logiq 5/P5 systems for resale into veterinary clinics, international markets, or smaller rural imaging facilities.
- Facilities with a parts-redundancy strategy — purchasing a tested spare to have on-hand before a failure occurs avoids emergency sourcing under pressure.
At $150, this also makes sense as a diagnostic swap — if you're unsure whether the keyboard or the control board is causing erratic behavior, a known-good keyboard assembly lets you isolate the fault without committing to a full board replacement.
Who Should Skip This
- Facilities without biomedical engineering support — if you don't have a trained BMET or GE-certified service engineer, this is not a self-install part.
- Systems running pre-production or very early Rev hardware — confirm Rev compatibility before purchasing.
- Anyone needing a new-in-box part with manufacturer warranty — contact GE Healthcare directly or a GE-authorized service partner for that level of assurance.
- Logiq E, Logiq 7, Logiq 9, or Logiq S8 owners — this assembly is specific to the Logiq 5 / P5 platform. It will not cross-fit other GE Logiq lines.
Alternatives Worth Considering
1. GE Authorized Parts Depot
If your facility requires warranty documentation or ISO-compliant part provenance, GE Healthcare's authorized parts channel is the appropriate source. Expect to pay 3–5x the secondary market price. Best for JCI-accredited hospitals with strict procurement requirements.
2. Other eBay Listings for 5175899
Multiple resellers periodically list this part. Always filter for sellers with 98%+ feedback and a clear return policy. Search active listings for GE Logiq P5 keyboard assemblies to compare pricing and condition descriptions.
3. Full Console Panel Replacement
If the keyboard assembly failure is symptomatic of broader panel wear — cracked bezels, worn encoders, or damaged trackball housing — it may be more cost-effective to source a complete front panel assembly from a parts-grade Logiq 5/P5 donor unit. These occasionally appear in the $300–$600 range and include the keyboard, trackball, and all rotary controls in one swap.
For context on evaluating other ultrasound system components, see our guide to ultrasound replacement parts and our ultrasound system component reviews.
Where to Buy
Primary Recommendation — eBay (floridamedicaleq): The listing referenced in this review (item 293220107472) offers the 5175899 Rev 7 assembly at $150 from floridamedicaleq, a Florida-based medical equipment dealer. This is the best current value we've found for this specific OEM part.
View the GE Logiq P5 keyboard assembly on eBay
Amazon — Parts Search: Amazon's medical equipment marketplace occasionally surfaces compatible GE Logiq parts through third-party sellers. Stock is less predictable than eBay for this category, but worth checking for competitive pricing.
Search Amazon for GE Logiq P5 keyboard assembly parts
Tip: If the listed unit sells before you purchase, set up an eBay saved search for "5175899" or "Logiq P5 keyboard" to get notified when new inventory appears.
Frequently Asked Questions
Q: Is the 5175899 Rev 7 compatible with both the Logiq 5 and Logiq P5? Yes — the Logiq P5 is a direct evolutionary successor to the Logiq 5, and GE used common keyboard assemblies across the platform family for most production runs. Rev 7 is the most broadly compatible revision. That said, always verify against your specific system's service manual or part-number label before ordering.
Q: Does this require a GE service engineer to install? Not necessarily. A trained biomedical equipment technician (BMET) with access to the GE Logiq 5/P5 service manual can perform this swap. GE field service is recommended if the control board or harness shows damage beyond the keyboard itself.
Q: What causes GE Logiq P5 keyboard failures? The most common causes are membrane wear from high-volume use, fluid ingress from gel contamination, and oxidized key contacts. The trackball housing is a secondary failure point. If keys are intermittently unresponsive rather than fully dead, a cleaning procedure with appropriate contact cleaner may temporarily resolve the issue before committing to a full swap.
Q: Can I use this part for a Logiq 7 or Logiq 9? No. The Logiq 7 and Logiq 9 are architecturally distinct platforms with different control panel designs. This assembly is specific to the Logiq 5 / P5 form factor.
Q: What is a fair price for a used GE Logiq P5 keyboard assembly? Secondary market pricing typically ranges from $100 to $300 for tested/functional OEM assemblies. The $150 price point in this listing is competitive. Untested or "as-is" units sometimes appear under $100, but carry higher risk for your service workflow.
Q: Is eBay safe for sourcing ultrasound parts? Yes, with appropriate due diligence. Filter for sellers with high feedback scores (98%+), review return policies, and use eBay's messaging system to ask specific condition questions before purchasing. eBay's Money Back Guarantee provides baseline buyer protection for items not as described.
Final Verdict
The GE Logiq 5 / P5 Keyboard Assembly (5175899 Rev 7) at $150 from floridamedicaleq is a solid, cost-effective OEM sourcing option for biomedical engineering teams and ultrasound service professionals maintaining these platforms. It offers genuine GE authenticity at a fraction of depot pricing, sold through a reputable channel with buyer protection in place. Verify Rev compatibility for your specific unit before purchasing, and have your service manual ready for installation. For in-house BMET teams looking to avoid a costly service call, this is a straightforward win. ```